New
−9%
Arduino Products
Arduino Kit Starter Kit with DIP ATmega328P STEM Kit
Part no. NE0000099GH₵400.00 GH₵440.00Save GH₵40.00
Product Overview: This Arduino Starter Kit is ideal for beginners and hobbyists looking to explore electronics and programming. At its core is an UNO R3-compatible board based on the ATmega328P microcontroller (DIP package), which makes it easy to replace or upgrade the chip. The kit typically includes a wide range of components and sensors to help you complete dozens of projects from simple LED b
In stock · 98 availableShips from Accra · Fast delivery across all 16 regions of Ghana and beyond!
- Same-day dispatch in Accra for orders before 14:00
- Pay securely with Mobile Money or card
- Genuine parts, tested before dispatch
Overview
Arduino Starter Kit with DIP ATmega328P
Product Overview:
This Arduino Starter Kit is ideal for beginners and hobbyists looking to explore electronics and programming. At its core is an UNO R3-compatible board based on the ATmega328P microcontroller (DIP package), which makes it easy to replace or upgrade the chip. The kit typically includes a wide range of components and sensors to help you complete dozens of projects from simple LED blinking to more advanced applications like sensor data acquisition or display interfacing.
Key Features (UNO-Compatible Board):
| Feature | Details |
|---|---|
| Microcontroller | ATmega328P (DIP socketed) |
| Operating Voltage | 5V |
| Input Voltage (Recommended) | 7–12V |
| Digital I/O Pins | 14 (6 PWM outputs) |
| Analog Input Pins | 6 |
| Flash Memory | 32 KB (0.5 KB used by bootloader) |
| SRAM / EEPROM | 2 KB / 1 KB |
| Clock Speed | 16 MHz |
| USB Interface | CH340G or ATmega16U2 (depends on version) |
| Programming Interface | USB-B / Micro USB (varies by kit) |
Typical Kit Components
| Category | Components Included |
|---|---|
| Power & Logic | Breadboard, jumper wires, resistors, capacitors, transistors |
| Output | LEDs (various colors), buzzer, RGB LED, 7-segment display, LCD1602 or OLED |
| Input | Push buttons, potentiometers, IR remote & receiver, ultrasonic sensor, joystick |
| Sensors | DHT11 (temperature/humidity), photoresistor (LDR), tilt sensor, flame sensor |
| Modules | Relay, motor driver (L298N or ULN2003), servo motor, stepper motor + driver board |
| Communication | IR receiver, HC-05 Bluetooth, RFID reader (optional in advanced kits) |
💡 Applications:
-
Learning electronics and programming
-
Prototyping and developing smart devices
-
STEM education and robotics projects
-
Home automation basics and sensor interfacing
Kit components
1pcs UNO R3
1pcs USB cable
1pcs 65 jumper wires
1pcs 830 Point BREADBOARD
15pcs led (Red, Green, Yellow)
30pcs resistance(220R, 10K, 1K)
1pcs 10 pin dupont line(male to female)
1pcs potentiometer
1pcs active buzzer
1pcs passive buzzer
1pcs 74HC595N
1pcs Infrared receiving head
1pcs LM35DZ
1pcs Flame sensor
2pcs Roll Ball Switch
3pcs 5mm LDR
5pcs Button Switch with Cap
1pcs IR remote control
1pcs one digital tube
1pcs four digital tube
1pcs 8*8 dot matrix tube
1pcs UNL2003 driver board
1pcs 5V stepper motor
1pcs SG90
1pcs LCD1602 IIC I2C
1pcs PS2 game joystick module
1pcs DHT11 Temperature and Humidity sensor module
1pcs Water level measurement module
1pcs RFID module
1pcs RFID key ring
1pcs RFID card
1pcs sound sensor module
1pcs one road relay module
1pcs RTC module
1pcs 16 buttons matrix keyboard module
1pcs RGB three color module
1pcs 9V Battery Connector
Gallery
